We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Retaining wall.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Retaining wall(1m) - List of Manufacturers, Suppliers, Companies and Products

Retaining wall Product List

1～5 item / All 5 items

Displayed results
Large block retaining wall for 5-degree slope "Go Block"

Large block retaining wall for 5-degree slope "Go Block"

A large block retaining wall that creates a 5-degree slope simply by installing the product.

■NETIS CB-100043-A (Publication Ended) ■This is a large block retaining wall type that stacks large precast blocks at a slope of 1:0.5 (standard) and fills the blocks with concrete. ■The product's retaining wall has a large opening, allowing for integration with cast-in-place concrete. ■It is easy to set the thickness of components according to design conditions, making it possible to create an economical retaining wall. ■By using dedicated hardware, the product can be lifted horizontally. ■The product lengths are available in 2m and 1m, and the product heights are 1m and 0.5m, allowing for flexible adaptation to site configurations. ■The maximum applicable retaining wall height is approximately 15m. (Please consult regarding applicable heights.)

  • others
  • 2D CAD Construction
  • 3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Half Precast Gravity Retaining Wall "Dragon Wall"

Half Precast Gravity Retaining Wall "Dragon Wall"

A simple retaining wall that realizes "productivity improvement." It contributes to labor and effort reduction!

★Lightweight components weighing around 600kg, easy to handle!! ■ There are few transportation restrictions, making it possible to transport and construct in narrow spaces. ■ Construction can be done with a crane-equipped backhoe, allowing for easy maneuverability. *1 ★Half precast structure!! ■ Significantly shortens construction time and achieves labor-saving and efficiency in construction. ■ Since it only involves stacking blocks, it minimizes the need for special tasks like formwork. *2 ■ The surface becomes precast material, allowing for a beautiful and high-quality finish. ★Thorough pursuit of construction efficiency!! ■ There are few types of blocks, making product management easy. ■ By setting the standard product length to 3.0m, construction efficiency can be greatly increased. ■ The use of joint pins makes alignment easy. *For vertical wall sections ■ Unifying the bolt specifications improves workability. ■ The special drainage hole shape also makes the installation of drainage pipes easy. ■ The sloped wall sections can also serve as scaffolding. *1 There may be restrictions depending on the working radius, etc. *2 Formwork for the ends and top concrete will be necessary.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precast L-shaped retaining wall with vehicle protection fence foundation 'SL-G'

Precast L-shaped retaining wall with vehicle protection fence foundation 'SL-G'

Industry first! Vehicle protective fence foundation PCa L-shaped retaining wall that can be processed with slanted cuts.

■NETIS CB-100045-A (Publication Ended) ■This is a road L-shaped retaining wall that has been standardized in accordance with the "Guidelines for Road Earthworks - Retaining Wall Works" and "Installation Standards and Explanations for Protective Fences," integrating a foundation for vehicle protective fences. ■By integrating the L-shaped retaining wall with the foundation for vehicle protective fences, significant cost reduction and shortening of construction time are achieved, while maximizing the road width. ■It is possible to process the top edge with a slant cut, allowing installation without tilting the product even on a road longitudinal slope of about 15%. ■The standard product can accommodate a horizontal alignment with a minimum radius of approximately R=20m. ■Standardized heights range from H=1,000 to 4,000.

  • others
  • 2D CAD Construction
  • 3D CAD

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SL retaining wall - Multi SL-F

SL retaining wall - Multi SL-F

L-shaped retaining wall with fence foundation, compatible with top edge slant cutting type.

The "SL Retaining Wall - Multi SL-F" is an L-shaped retaining wall for road use with a protective fence foundation, designed to accommodate any longitudinal slope through sloped processing at the top of the wall (supports slopes up to 15%*1). By integrating the retaining wall and the protective fence foundation, we have significantly simplified the installation work for the protective fence and shortened the construction period. Since posts can be installed at the top of the retaining wall, the road width can be maximized. *Thanks to the specially shaped base plate, it can flexibly accommodate horizontal curves. Post holes are provided at 1-meter intervals, allowing for compatibility with protective fences and fences with post spacings of 2 meters and 3 meters. Under certain conditions, it can also accommodate slopes greater than 15%.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible cantilever retaining wall "Free Wall (Box-type Retaining Wall)"

Flexible cantilever retaining wall "Free Wall (Box-type Retaining Wall)"

Retaining wall constructed with precast products and single-sized crushed stone.

■NETIS CB-040038-A (Publication Period Ended) ■This is a retaining wall that obtained construction technology certification from the Public Interest Incorporated Foundation Civil Engineering Research Center in March 2004. ■Due to its flexible structure, it reduces the stress generated by the slight movement of the wall against soil pressure during an earthquake, thereby preventing cracking and collapse of the wall. ■The ground reaction force during an earthquake is relatively small, and it demonstrates adaptability to differential settlement of the foundation ground and backfill soil, maintaining the overall safety of the wall. ■The layer of single-sized crushed stone has extremely high drainage capacity, which inevitably stabilizes the backfill soil. ■Since there is almost no work involving rebar, concrete, or formwork at the construction site, significant reductions in construction time and improvements in cost-effectiveness can be achieved. ■The product can be used in an inverted manner, making curved construction easy. ■The stepped shape has a three-dimensional aesthetic, allowing for planting and natural greening using each step, which contributes to ecosystem preservation. ■The maximum wall height in construction records is 21m. (Please consult us regarding applicable heights) *For more details, please download the materials or contact us through our website.*

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Retaining wall

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.